资源类型

期刊论文 678

年份

2024 1

2023 36

2022 59

2021 46

2020 42

2019 55

2018 21

2017 18

2016 36

2015 12

2014 45

2013 47

2012 23

2011 30

2010 35

2009 47

2008 28

2007 24

2006 9

2005 14

展开 ︾

关键词

混凝土 16

三峡工程 8

三峡升船机 4

钢箱梁 4

TRIP钢 3

三塔悬索桥 3

升船机 3

可持续发展 3

混凝土面板堆石坝 3

三点弯曲梁 2

优化 2

低成本 2

关键技术 2

创新 2

压力容器技术 2

发展 2

应力波 2

循环经济 2

悬索桥 2

展开 ︾

检索范围:

排序: 展示方式:

Modelling and experimental verification on concrete-filled steel tubular columns with L or T section

LU Xilin, LI Xueping, WANG Dan

《结构与土木工程前沿(英文)》 2007年 第1卷 第2期   页码 163-169 doi: 10.1007/s11709-007-0017-z

摘要: Concrete-filled steel tubular columns with L or T sections were analyzed in this paper. According to the confining mechanism, the stress-strain constitutive model was put forward, and calculated results were compared with experimental records. After that, the hysteretic rules for the in-filled concrete were constructed, aiming at the analysis on the seismic behavior of composite members. The simulation analysis was performed by programming it in Fortran. The models in this paper can be applied in the program of time history analysis on tall buildings with concrete-filled steel tubular columns with L or T sections.

关键词: hysteretic     confining mechanism     Concrete-filled     in-filled     composite    

Behaviors of recycled aggregate concrete-filled steel tubular columns under eccentric loadings

Vivian W. Y. TAM, Jianzhuang XIAO, Sheng LIU, Zixuan CHEN

《结构与土木工程前沿(英文)》 2019年 第13卷 第3期   页码 628-639 doi: 10.1007/s11709-018-0501-7

摘要: The paper investigates the behaviors of recycled aggregate concrete-filled steel tubular (RACFST) columns under eccentric loadings with the incorporation of expansive agents. A total of 16 RACFST columns were tested in this study. The main parameters varied in this study are recycled coarse aggregate replacement percentages (0%, 30%, 50%, 70%, and 100%), expansive agent dosages (0%, 8%, and 15%) and an eccentric distance of compressive load from the center of the column (0 and 40 mm). Experimental results showed that the ultimate stresses of RACFST columns decreased with increasing recycled coarse aggregate replacement percentages but appropriate expansive agent dosages can reduce the decrement; the incorporation of expansive agent decreased the ultimate stresses of RACFST columns but an appropriate dosage can increase the deformation ability. The recycled coarse aggregate replacement percentages have limited influence on the ultimate stresses of the RACFST columns and has more effect than that of the normal aggregate concrete-filled steel tubular columns.

关键词: concrete filled steel tubes     recycled aggregate concrete     columns     expansive agent     eccentric load    

Stress-strain relationship of recycled self-compacting concrete filled steel tubular column subjected

Feng YU, Cheng QIN, Shilong WANG, Junjie JIANG, Yuan FANG

《结构与土木工程前沿(英文)》 2020年 第14卷 第3期   页码 760-772 doi: 10.1007/s11709-020-0618-3

摘要: As a typical compression member, the concrete-filled steel tube has been widely used in civil engineering structures. However, little research on recycled self-compacting concrete filled circular steel tubular (RSCCFCST) columns subjected to eccentric load was reported. In this study, 21 specimens were designed and experimental studies on the stress-strain relationship of were carried out to study the mechanical behaviors. Recycled coarse aggregate replacement ratio, concrete strength grade, length to diameter ratio and eccentric distance of specimens were considered as the main experimental parameters to carry out eccentric compression tests. The corresponding stress-strain relationship curves were used to analyze the influence of concerned parameters on eccentric load-bearing capacity of RSCCFCST columns. The experimental results show that the strain of the eccentric compression stress-strain curves increase with the increase of recycled coarse aggregate replacement ratio and concrete strength grade. With increase of eccentric distance, the ductility of specimens increases while the bearing capacity decreases. Moreover, a phenomenological model of RSCCFCST columns is proposed, which exhibits versatile ability to capture the process during loading. The present study is expected to further understanding the behaviors and to provide guidance of RSCCFCST columns in design and engineering applications.

关键词: concrete filled circular steel tubular columns     recycled self-compacting concrete     eccentric compression     recycled coarse aggregate replacement ratio     stress-strain relationship    

Behavior of concrete-filled double skin steel tubular columns with octagon section under axial compression

YANG Junjie, PENG Guojun, XU Hanyong

《结构与土木工程前沿(英文)》 2008年 第2卷 第3期   页码 205-210 doi: 10.1007/s11709-008-0035-5

摘要: Based on some conclusions of two kinds of concrete-filled double skin steel tube (CFDSST) members with circular or square sections, a new kind of CFDSST with octagonal section, where the outer tube has an octagonal section and the inner tube has a circular section, is proposed in this paper. Behaviors of the CFDSST members with octagon section subjected to axial compression are investigated, and some curves of load-strain of steel tubes and confined concrete and the bearing capacity of members are obtained. It is indicated that the bearing capacity of the columns with octagonal section is larger than that with square section and is smaller than that with circular section, and the bearing capacity of members is related to the ratio of the straight side to the bevelled one. Based on the proper stress-strain relationship, a couple of numerical analyses are made using the finite element software named ANSYS. Finally, a simplified formula is proposed in the paper, and the numerical results agree well with the experimental results and the mathematical solutions. The results are valuable for engineers.

关键词: mathematical     numerical     compression     stress-strain relationship     straight    

Cyclic behavior of stiffened joints between concrete-filled steel tubular column and steel beam with

Chunyan QUAN,Wei WANG,Jian ZHOU,Rong WANG

《结构与土木工程前沿(英文)》 2016年 第10卷 第3期   页码 333-344 doi: 10.1007/s11709-016-0357-7

摘要: This paper presented an investigation on a stiffened joint in practical engineering which was between concrete-filled steel tubular column and steel beam with narrow outer diaphragm and partial joint penetration welds. Through the low-frequency cyclic loading test, the cyclic behavior and failure mode of the specimen were investigated. The results of the test indicated the failure mode and bearing capacity of the specimen which were influenced by the axial compression ratio of the concrete-filled tubular column. On the contrary, the inner diaphragm and inner stiffeners had limited impacts on the hysteretic behavior of the joint. There was no hysteresis damage fracture on the narrow outer diaphragm connected to the concrete-filled steel tubular column with partial joint penetration welds. Due to the excellent ductility and energy dissipating capacity, the proposed joint could be applied to the seismic design of high-rise buildings in highly intensive seismic region, but axial compression ratio should be controlled to avoid unfavorable failure modes.

关键词: narrow outer diaphragm     concrete-filled tubular column     joint     inner and outer stiffening     cyclic behavior    

Experimental research on self-stressing and self-compacting concrete filled steel tube columns subjected

Chengkui HUANG, Zuoqing SHANG, Peng ZHANG,

《结构与土木工程前沿(英文)》 2009年 第3卷 第4期   页码 455-461 doi: 10.1007/s11709-009-0058-6

摘要: A total of fifteen self-stressing and self-compacting concrete (SSC) filled steel tube columns and three common self-compacting concrete filled steel tube (CFST) columns are tested under eccentric compression load to analyze the effect of initial self-stress on the compression behavior of CFSTs. The results show that the elastic working range of the columns is lengthened because of initial self-stress and it slightly decreases with the increase of load eccentricity ratio and slenderness ratio. Because of the initial self-stress, the concrete core is always under compression in three directions, so the compactness is enhanced and the ultimate bearing capacity obviously increases; but the initial self-stress hardly affects the failure mode of the columns.

关键词: increase     capacity     failure     CFSTs     CFST    

Performance study on T-stub connected semi-rigid joint between rectangular tubular columns and H-shapedsteel beams

Guochang LI, Hongping YU, Chen FANG

《结构与土木工程前沿(英文)》 2013年 第7卷 第3期   页码 296-303 doi: 10.1007/s11709-013-0217-7

摘要: This paper investigates the performance of T-stub connected semi-rigid joint of rectangular tubular columns and H-shaped steel beams. The finite element analysis software ABAQUS is used to analyze the nonlinear performance of the joint under monotonic loading. Meanwhile, the dimensions of T-stub, column and beam are considered as analytic parameters to discuss the performance of the joint. The analysis shows that the thickness and the length of T-stub webs, the height of beam section, bolt diameter, shear connector and the preloaded force affect the performance of the joint largely, and the thickness of the steel tube, the thickness and length of T-stub flange, bolt spacing have relatively little influences on the performance of the joint. The research results indicate that this joint is semi-rigid joint.

关键词: rectangular tubular columns     T-stub     semi-rigid     nonlinear finite element analysis     moment-rotation curves    

Typical diseases of a long-span concrete-filled steel tubular arch bridge and their effects on vehicle-induced

Jianling HOU, Weibing XU, Yanjiang CHEN, Kaida ZHANG, Hang SUN, Yan LI

《结构与土木工程前沿(英文)》 2020年 第14卷 第4期   页码 867-887 doi: 10.1007/s11709-020-0649-9

摘要: A long-span concrete-filled steel tubular (CFST) arch bridge suffers severe vehicle-induced dynamic responses during its service life. However, few quantitative studies have been reported on the typical diseases suffered by such bridges and their effects on vehicle-induced dynamic response. Thus, a series of field tests and theoretical analyses were conducted to study the effects of typical diseases on the vehicle-induced dynamic response of a typical CFST arch bridge. The results show that a support void results in a height difference between both sides of the expansion joint, thus increasing the effect of vehicle impact on the main girder and suspenders. The impact factor of the displacement response of the main girder exceeds the design value. The variation of the suspender force is significant, and the diseases are found to have a greater effect on a shorter suspender. The theoretical analysis results also show that the support void causes an obvious longitudinal displacement of the main girder that is almost as large as the vertical displacement. The support void can also cause significant changes in the vehicle-induced acceleration response, particularly when the supports and steel box girder continue to collide with each other under the vehicle load.

关键词: long-span arch bridge     expansion joint disease     vehicle-bridge coupling vibration     dynamic response    

Confinement properties of circular concrete columns wrapped with prefabricated textile-reinforced fineconcrete shells

《结构与土木工程前沿(英文)》 doi: 10.1007/s11709-023-0955-0

摘要: This paper proposes an innovative column composed of a core column (including both reinforced concrete (RC) and plain concrete (PC) columns) and a prefabricated textile-reinforced fine concrete (TRC) shell. To study the confinement properties of TRC shells on this novel type of concrete column, 20 circular specimens, including 12 PC columns and 8 RC columns, were prepared for axial compressive tests. Four key parameters, including the column size, reinforcing ratio of the carbon textile, concrete strength, and stirrup spacing, were evaluated. The results indicated that the compressive properties of the columns were improved by increasing the reinforcing ratio of the textile layers. In the case of TRC-confined PC columns, the maximum improvement in the peak load was 56.3%, and for TRC-confined RC columns, the maximum improvement was 60.2%. Based on the test results, an analytical model that can be used to calculate the stress–strain curves of prefabricated TRC shell-confined concrete columns has been proposed. The calculated curves predicted by the proposed model agreed well with the test results.

关键词: textile-reinforced fine concrete     prefabricated shell     confined concrete column     confinement properties     stress–strain relationship    

700 m级钢管混凝土拱桥设计与建造可行性研究

郑皆连,王建军,牟廷敏,冯智,韩玉,秦大燕

《中国工程科学》 2014年 第16卷 第8期   页码 33-37

摘要:

以500 m级钢管混凝土拱桥的设计和成套施工技术为基础,对700 m级钢管混凝土拱桥的设计和建造技术进行可行性研究,确定总体设计和施工方案,较为详细地研究了拱肋制造和安装、管内混凝土灌注等关键技术。研究结果表明,建造700 m级的钢管混凝土拱桥已不存在技术门槛,综合考虑经济、安全等因素,是该跨径级别的强力竞争桥型之一,应尽早进行工程实践和推广。

关键词: 桥梁工程     700 m跨径级别     钢管混凝土拱桥     设计     建造    

Theoretical study on the confine-stiffening effect and fractal cracking of square concrete filled steel

《结构与土木工程前沿(英文)》 2021年 第15卷 第6期   页码 1317-1336 doi: 10.1007/s11709-021-0763-3

摘要: Tension stress in steel-concrete composite is widely observed in engineering design. Based on an experimental program on tension performance of three square concrete-filled tubes (SCFT), the tension theory of SCFT is proposed using a mechanics-based approach. The tension stiffening effect, the confining strengthening effect and the confining stiffening effect, observed in tests of SCFTs are included in the developed tension theory model. Subsequently, simplified constitutive models of steel and concrete are proposed for the axial tension performance of SCFT. Based on the MSC.MARC software, a special fiber beam-column element is proposed to include the confining effect of SCFTs under tension and verified. The proposed analytical theory, effective formulas, and equivalent constitutive laws are extensively verified against three available tests reported in the literature on both global level (e.g., load-displacement curves) and strain level. The experimental verification proves the accuracy of the proposed theory and formulations in simulating the performance of SCFT members under tension with the capability to accurately predict the tensile strength and stiffness enhancements and realistically simulate the fractal cracking phenomenon.

关键词: square concrete filled tubes     confine-stiffening     confine-strengthening     fractal cracking     fracture    

Axial compression tests and numerical simulation of steel reinforced recycled concrete short columns

Hui MA; Fangda LIU; Yanan WU; Xin A; Yanli ZHAO

《结构与土木工程前沿(英文)》 2022年 第16卷 第7期   页码 817-842 doi: 10.1007/s11709-022-0844-y

摘要: To research the axial compression behavior of steel reinforced recycled concrete (SRRC) short columns confined by carbon fiber reinforced plastics (CFRP) strips, nine scaled specimens of SRRC short columns were fabricated and tested under axial compression loading. Subsequently, the failure process and failure modes were observed, and load-displacement curves as well as the strain of various materials were analyzed. The effects on the substitution percentage of recycled coarse aggregate (RCA), width of CFRP strips, spacing of CFRP strips and strength of recycled aggregate concrete (RAC) on the axial compression properties of columns were also analyzed in the experimental investigation. Furthermore, the finite element model of columns which can consider the adverse influence of RCA and the constraint effect of CFRP strips was founded by ABAQUS software and the nonlinear parameter analysis of columns was also implemented in this study. The results show that the first to reach the yield state was the profile steel in the columns, then the longitudinal rebars and stirrups yielded successively, and finally RAC was crushed as well as the CFRP strips was also broken. The replacement rate of RCA has little effect on the columns, and with the substitution rate of RCA from 0 to 100%, the bearing capacity of columns decreased by only 4.8%. Increasing the CFRP strips width or decreasing the CFRP strips spacing could enhance the axial bearing capacity of columns, the maximum increase was 10.5% or 11.4%, and the ductility of columns was significantly enhanced. Obviously, CFRP strips are conducive to enhance the axial bearing capacity and deformation capacity of columns. On this basis, considering the restraint effect of CFRP strips and the adverse effects of RCA, the revised formulas for calculating the axial bearing capacity of SRRC short columns confined by CFRP strips were proposed.

关键词: steel reinforced recycled concrete     CFRP strips     short columns     axial compression behavior     recycled aggregate concrete    

Moment-curvature relationship of FRP-concrete-steel double-skin tubular members

Mingxue LIU, Jiaru QIAN

《结构与土木工程前沿(英文)》 2009年 第3卷 第1期   页码 25-31 doi: 10.1007/s11709-009-0012-7

摘要: Tests were conducted on 3 specimens to study the flexural behavior of fiber reinforced polymer (FRP)-concrete-steel double-skin tubular members (DSTMs). The strip method was used to calculate the section moment-curvature curves of the 3 specimens and 12 models. A theoretical formula is presented for the flexural strength of DSTMs. The test results show that the tension zone of the specimen FRP tubes was in hoop compression while the compression zone was in hoop tension. The load-carrying capacity did not decrease even when the mid-span deflection reached about 1/24 of the span length. The tests, simulation and theoretical analysis resulted in a simplified formula for the flexural strength of DSTMs and a tri-linear moment-curvature model was expressed as a function of the section bending stiffness for DSTMs.

关键词: fiber reinforced polymer (FRP)     concrete     steel     double-skin tubular members (DSTMs)     moment-curvature curve     flexural strength    

钢管混凝土桥墩的应用与研究

臧华,刘钊

《中国工程科学》 2007年 第9卷 第7期   页码 71-75

摘要:

对钢管混凝土桥墩的诸多优良特性进行了介绍,总结了国内外钢管混凝土桥墩的应用及研究现状,并就钢管混凝土桥墩的应用前景以及结构形式的演变进行了展望。

关键词: 钢管混凝土     桥墩     应用     研究    

Axial compression behavior of CFRP-confined rectangular concrete-filled stainless steel tube stub column

《结构与土木工程前沿(英文)》 2021年 第15卷 第5期   页码 1144-1159 doi: 10.1007/s11709-021-0762-4

摘要: The mechanical properties of CFRP-confined rectangular concrete-filled stainless steel tube (CFSST) stub columns under axial compression were experimentally studied. A total of 28 specimens (7 groups) were fabricated for the axial compression test to study the influences of length-to-width ratio, CFRP constraint coefficient, and the thickness of stainless steel tube on the axial compression behavior. The specimen failure modes, the stress development of stainless steel tube and CFRP wrap, and the load–strain ratio curves in the loading process were obtained. Meanwhile, the relationship between axial and transverse deformations of each specimen was analyzed through the typical relative load−strain ratio curves. A bearing capacity prediction method was proposed based on the twin-shear strength theory, combining the limit equilibrium state of the CFRP-confined CFSST stub column under axial compression. The prediction method was calibrated by the test data in this study and other literature. The results show that the prediction method is of high accuracy.

关键词: CFRP     rectangular CFSST stub column     bearing capacity     limit equilibrium state     twin-shear strength theory    

标题 作者 时间 类型 操作

Modelling and experimental verification on concrete-filled steel tubular columns with L or T section

LU Xilin, LI Xueping, WANG Dan

期刊论文

Behaviors of recycled aggregate concrete-filled steel tubular columns under eccentric loadings

Vivian W. Y. TAM, Jianzhuang XIAO, Sheng LIU, Zixuan CHEN

期刊论文

Stress-strain relationship of recycled self-compacting concrete filled steel tubular column subjected

Feng YU, Cheng QIN, Shilong WANG, Junjie JIANG, Yuan FANG

期刊论文

Behavior of concrete-filled double skin steel tubular columns with octagon section under axial compression

YANG Junjie, PENG Guojun, XU Hanyong

期刊论文

Cyclic behavior of stiffened joints between concrete-filled steel tubular column and steel beam with

Chunyan QUAN,Wei WANG,Jian ZHOU,Rong WANG

期刊论文

Experimental research on self-stressing and self-compacting concrete filled steel tube columns subjected

Chengkui HUANG, Zuoqing SHANG, Peng ZHANG,

期刊论文

Performance study on T-stub connected semi-rigid joint between rectangular tubular columns and H-shapedsteel beams

Guochang LI, Hongping YU, Chen FANG

期刊论文

Typical diseases of a long-span concrete-filled steel tubular arch bridge and their effects on vehicle-induced

Jianling HOU, Weibing XU, Yanjiang CHEN, Kaida ZHANG, Hang SUN, Yan LI

期刊论文

Confinement properties of circular concrete columns wrapped with prefabricated textile-reinforced fineconcrete shells

期刊论文

700 m级钢管混凝土拱桥设计与建造可行性研究

郑皆连,王建军,牟廷敏,冯智,韩玉,秦大燕

期刊论文

Theoretical study on the confine-stiffening effect and fractal cracking of square concrete filled steel

期刊论文

Axial compression tests and numerical simulation of steel reinforced recycled concrete short columns

Hui MA; Fangda LIU; Yanan WU; Xin A; Yanli ZHAO

期刊论文

Moment-curvature relationship of FRP-concrete-steel double-skin tubular members

Mingxue LIU, Jiaru QIAN

期刊论文

钢管混凝土桥墩的应用与研究

臧华,刘钊

期刊论文

Axial compression behavior of CFRP-confined rectangular concrete-filled stainless steel tube stub column

期刊论文